IEI Integration IMBA-C2260-i2 - Manual (Page 90)

IMBA-C2260-i2 ATX Motherboard
Page 73
Figure 4-18: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
4.7.3 PS/2 Keyboard and Mouse Connection
The IMBA-C2260-i2 has a PS/2 connector on the external peripheral interface panel. The
PS/2 connector is used to connect to a keyboard or a mouse to the system. Follow the
steps below to connect a keyboard or a mouse to the IMBA-C2260-i2.
Step 1: Locate the PS/2 connector. The location of the PS/2 connector is shown in
Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the PS/2 connector on the external peripheral interface connector.
See Figure 4-19.