IEI Integration NANO-945GSE v1.01 - Manual (Page 118)

NANO-945GSE EPIC Motherboard
Page 98
Figure 5-17: SATA Power Drive Connection
5.7.7 Single RS-232 Cable (w/o Bracket)
The single RS-232 cable consists of one serial port connector attached to a serial
communications cable that is then attached to a D-sub 9 male connector. To install the
single RS-232 cable, please follow the steps below.
Step 1: Locate the connector. The location of the RS-232 connector is shown in
Chapter 3.
Step 2: Insert the cable connector. Insert the connector into the serial port box header.
See
911H
Figure 5-18. A key on the front of the cable connectors ensures the
connector can only be installed in one direction.