IEI Integration NANO-945GSE v1.01 - Manual (Page 123)

NANO-945GSE EPIC Motherboard
Page 103
Figure 5-22: Dual Serial Port Connector Cable Connection
Step 4: Attach DB-9 serial port connectors to the chassis. The dual DB-9 serial port
connectors can be inserted into dual preformed holes in the chassis. Once,
inserted the DB-9 connectors should be secured to the chassis with retention
screws. Step 0:
5.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
RJ-45 Ethernet cable connectors
PS/2 devices
Serial port devices
USB devices
VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding NANO-945GSE external peripheral interface connector
making sure the pins are properly aligned.