IEI Integration NANO-945GSE v1.01 - Manual (Page 127)

NANO-945GSE EPIC Motherboard
Page 107
5-26. Step 0:
Figure 5-26: USB Connector
5.8.5 VGA Monitor Connection
The NANO-945GSE has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the NANO-945GSE, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
NANO-945GSE. See
863H921H
Figure 5-27.