IEI Integration NANO-9452 v4.01 - Manual (Page 105)

NANO-9452 EPIC Motherboard
Page 87
Step 4: Connect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See Figure 5-19. Step 0:
Figure 5-19: SATA Power Drive Connection
5.7 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 Serial port devices
 VGA monitors
 Parallel port devices
 RJ-45 Ethernet cable connectors
 Mouse and keyboard
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding NANO-9452 external peripheral interface connector making
sure the pins are properly aligned.