IEI Integration NANO-9452 v4.01 - Manual (Page 89)

NANO-9452 EPIC Motherboard
Page 71
Figure 5-6: SODIMM Installation
Step 1: Locate the SODIMM socket. Place the NANO-9452 on an anti-static pad with
the solder side facing up.
Step 2: Align the SODIMM with the socket. The SODIMM must be oriented in such a
way that the notch in the middle of the SODIMM must be aligned with the plastic
bridge in the socket.
Step 3: Insert the SODIMM. Push the SODIMM chip into the socket at an angle. (See
Figure 5-6)
Step 4: Open the SODIMM socket arms. Gently pull the arms of the SODIMM socket
out and push the rear of the SODIMM down. (See Figure 5-6)
Step 5: Secure the SODIMM. Release the arms on the SODIMM socket. They clip into
place and secure the SODIMM in the socket. Step 0: