IEI Integration NANO-9452 v4.01 - Manual (Page 83)

NANO-9452 EPIC Motherboard
Page 65
Before and during the installation of the NANO-9452 DO NOT:
 Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
 Use the product before verifying all the cables and power connectors are
properly connected.
 Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the NANO-9452 is properly installed.
 All the items in the packing list are present
 The CPU is installed
 The CPU cooling kit is properly installed
 A compatible memory module is properly inserted into the slot
 The CF Type I or CF Type II card is properly installed into the CF socket
 The jumpers have been properly configured
 The NANO-9452 is inserted into a chassis with adequate ventilation
 The correct power supply is being used
 The following devices are properly connected
o IDE device
o SATA drives
o Keyboard and mouse cable
o Audio kit
o Power supply
o USB cable
o Serial port cable
o Parallel port cable
 The following external peripheral devices are properly connected to the
chassis:
o VGA screen
o Keyboard
o Mouse
o RS-232 serial communications device