IEI Integration NANO-QM57A - Manual (Page 64)

NANO-QM57A EPIC SBC
Page 52
Figure 4-17: USB Connector
4.8.4 VGA Monitor Connection
The NANO-QM57A is shipped with a DVI-I (male) to VGA adapter (female DB-15
connector) . The DB-15 connector is connected to a CRT or VGA monitor. To connect a
monitor to the NANO-QM57A, please follow the instructions below.
Step 1: Locate the DVI-I connector (VIDEO2). The location of the VIDEO2 connector
is shown in Chapter 3.
Step 2: Align the DVI-I to VGA adapter. Align the DVI-I (male) end of the DVI-I to VGA
adapter with the VIDEO2 connector on the external peripheral interface.
Step 3: Insert the DVI-I to VGA connector. Once the connectors are properly aligned,
insert male connector from the adapter into the female connector on the
NANO-QM57A
Step 4: Locate the female DB-15 connector on the adapter.