Figure 5-4: cooling kit support bracket, Figure 5-5: connect the cooling fan cable – IEI Integration NANO-9453 v1.12 User Manual
Page 100
Advertising
NANO-9453 EPIC Motherboard
Page 82
Figure 5-4: Cooling Kit Support Bracket
Step 11:
Tighten the screws. Use a screwdriver to tighten the four screws. Tighten each
nut a few turns at a time and do not over-tighten the screws.
Step 12:
Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the motherboard. Carefully route the cable and avoid heat generating chips
and fan blades. See Figure 5-5.
Step 12:
Figure 5-5: Connect the cooling fan cable
Advertising