Figure 5-16: 5.1 channel audio kit – IEI Integration NANO-9453 v1.12 User Manual
Page 114
Advertising
NANO-9453 EPIC Motherboard
Page 96
Figure 5-15: 5.1 Channel Audio Kit
Step 4:
Mount the audio kit onto the chassis. Once the audio kit is connected to the
NANO-9453, secure the audio kit bracket to the system chassis.
Step 5:
Connect the audio devices. Connect one speaker to the line-in audio jack, one
speaker to the line-out audio jack and a microphone to the mic-in audio jack.
Step 6:
Install the driver. If the 5.1 channel audio kit is used, the ALC655 Realtek
codec driver must be installed. Refer to Chapter 7 for driver installation
instructions.
Step 0:
Advertising