IEI Integration NANO-HM650 - Manual (Page 76)

NANO-HM650 EP IC S BC
P a g e 61
Figure 4-19: USB Connector
4.6.4 VGA Mo n ito r Co n n e c tio n
The NANO-HM650 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the NANO-HM650, please follow the instructions below.
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
NANO-HM650. See Figure 4-19.