IEI Integration NANO-HM650 - Manual (Page 87)

NANO-HM650 EP IC S BC
P a g e 72
 S ATA Co n tro lle r(s ) [En ab led ]
Use the SATA Controller(s) option to enable or disable the use of SATA Devices.

Enabled D EFAULT Enables SATA devices.

Disabled Disables SATA devices.
 S ATA Mo d e Selectio n [IDE]
Use the SATA Mode option to configure SATA devices as normal IDE devices.

IDE D EFAULT Configures SATA devices as normal IDE device.

AHCI Configures SATA devices as AHCI device.

RAID Configures SATA devices as RAID device.
5.3.5 US B Co n fig u ra tio n
Use the USB Configuration menu (BIOS Menu 6) to read USB configuration information
and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
2 Hubs
USB2.0 Support
[Enabled]
Legacy USB2.0 Support [Enabled]
USB Support Parameters
---------------------
: Select Screen
↑ ↓: Select Item
Enter
Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4
Save
ESC Exit
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
BIOS Menu 7: USB Configuration
 USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system