IEI Integration NANO-QM770 - Manual (Page 58)

NANO-QM770 EPIC SBC
Page 43
4.3 SO-DIMM Installation
To install an SO-DIMM, please follow the steps below and refer to Figure 4-1.
Figure 4-1: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket. Place the board on an anti-static mat.
Step 2: Align the SO-DIMM with the socket. Align the notch on the memory with the
notch on the memory socket.
Step 3: Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1)
Step 4: Seat the SO-DIMM. Gently push downwards and the arms clip into place. (See
Figure 4-1)
4.4 PCIe Mini Card Installation
A PCIe Mini card slot is located on the solder side of the NANO-QM770. To install the
PCIe Mini card, please refer to the diagram and instructions below.