IEI Integration NANO-QM770 - Manual (Page 62)

NANO-QM770 EPIC SBC
Page 47
Pin Description
Short 1-2 Keep CMOS Setup (Default)
Short 2-3 Clear CMOS Setup
Table 4-3: Clear CMOS Jumper Settings
Figure 4-4: Clear CMOS Jumper Location
4.5.3 Clear ME RTC Registers
Jumper Label: ME_RTC1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-4
Jumper Location: See Figure 4-5
Resets the RTC registers used for the Intel® Management Engine when the on-board
battery is changed.
Pin Description
Short 1-2 Save ME RTC registers (Default)
Short 2-3 Clear ME RTC registers
Table 4-4: Clear ME RTC Registers Jumper Settings