4 usb connection, Figure 4-17: lan connection – IEI Integration NANO-QM770 User Manual
Page 74
Advertising
NANO-QM770 EPIC SBC
Page 59
Figure 4-17: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
Step 0:
4.8.4 USB Connection
The external USB 3.0 connectors provide easier and quicker access to external USB
devices. Follow the steps below to connect USB devices to the NANO-QM770.
Step 1:
Locate the USB 3.0 connectors. The locations of the USB 3.0 connectors are
shown in Chapter 3.
Step 2:
Insert a USB 3.0 plug.
Insert the USB 3.0 plug of a device into the USB 3.0 on
the external peripheral interface. See Figure 4-18.
Step 0:
Advertising