IEI Integration ECW-281B-N270-WT v3.01 - Manual (Page 155)

ECW-281B/281B2-R30/N270 Embedded System
Page 140
Figure B-14: Select a Local Source Drive
Step 6: Select a source partition (Part 1) from basic drive as shown in Figure B-15.
Then click OK.
Figure B-15: Select a Source Partition from Basic Drive
Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei
(Figure B-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO .