IEI Integration ECW-281B-N270-WT v3.01 - Manual (Page 68)

ECW-281B/281B2-R30/N270 Embedded System
Page 53
4.2.8 DIN Mounting
To mount the ECW-281B/281B2-R30/N270 embedded system onto a DIN rail, please
follow the steps below.
Step 1: Attach the DIN rail mounting bracket to the bottom panel of the embedded
system. Secure the bracket to the embedded system with the supplied retention
screws (
77
Figure 4-9 ).
Figure 4-9: DIN Rail Mounting Bracket
Step 2: Make sure the inserted screw in the center of the bracket is at the lowest
position of the elongated hole (
77
Figure 4-10 ).
Figure 4-10: Screw Locations