IEI Integration ECW-281B-N270-WT v3.01 - Manual (Page 67)

ECW-281B/281B2-R30/N270 Embedded System
Page 52
Step 7: Align the mounting screws on the ECW-281B/281B2-R30/N270 bottom panel
with the mounting holes on the bracket.
Step 8: Carefully insert the screws through the holes and gently pull the monitor
downwards until the ECW-281B/281B2-R30/N270 rests securely in the slotted
holes (
77
Figure 4-8 ). Ensure that all four of the mounting screws fit snuggly into
their respective slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.
Figure 4-8: Mount the Embedded System