IEI Integration TANK-101B-D525_N455 v1.02 - Manual (Page 38)

TANK-101B/BW Embedded System
Page 27
5 GND GND
6 N/A N/A
7 N/A N/A
8 N/A N/A
9 N/A N/A
Table 3-6: RS-422/485 Serial Port Pinouts
Figure 3-15: RS-422/485 Serial Port Pinout Location
3.7.8 USB Connectors
CN Type: USB port
CN Location: See Figure 1-2 and Figure 1-3
CN Pinouts: See Table 3-7
The USB ports are for connecting USB peripheral devices to the system.
Step 1: Locate the USB connectors. The locations of the USB connectors are shown in
Figure 1-2 and Figure 1-3.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors. See Figure 3-16.