A.2 setup procedure for windows, Etup, Rocedure for – IEI Integration TANK-101B-D525_N455 v1.02 User Manual
Page 74: Indows
TANK-101B/BW Embedded System
Page 63
o
Ubuntu 8.10 (Intrepid)
o
Ubuntu 7.10 (Gutsy)
o
Ubuntu 6.10 (Edgy)
o
Debian 5.0 (Lenny)
o
Debian 4.0 (Etch)
o
SuSe 11.2
o
SuSe 10.3
NOTE:
Installing unsupported OS versions may cause the recovery tool to fail.
A.2 Setup Procedure for Windows
Prior to using the recovery tool to backup or restore Windows system, a few setup
procedures are required.
Step 1:
Hardware and BIOS setup (see Section
74
A.2.1
)
Step 2:
Create partitions (see Section
74
A.2.2
)
Step 3:
Install operating system, drivers and system applications (see Section
74
A.2.3
)
Step 4:
Build the recovery partition (see Section A.2.4) or build the auto recovery
partition (see Section A.3)
Step 5:
Create factory default image (see Section
74
A.2.5
)
S
te
p
0
:
The detailed descriptions are described in the following sections.
NOTE:
The setup procedures described below are for Microsoft Windows
operating system users. For Linux, most of the setup procedures are
the same except for several steps described in Section A.3.