12 rj-45 rs-232 serial ports, Figure 3-23: rj-45 rs-232 serial device connection – IEI Integration TANK-700-QM67 v1.12 User Manual
Page 45
TANK-700 Embedded System
Page 33
3.9.12 RJ-45 RS-232 Serial Ports
CN Label:
RS 232
CN Type:
RJ-45
CN Location:
CN Pinouts:
RS-232 serial port devices can be attached to the RJ-45 RS-232 serial ports on the front
panel.
Step 1:
Locate the RJ-45 RS-232 connectors
. The locations of the RJ-45 RS-232
connectors are shown in Figure 1-2.
Step 2:
Insert the RJ-45 connector
. Insert the RJ-45 connector on the
RJ-45 to DB-9
COM port cable to one of the RJ-45 RS-232 connectors on the TANK-700. See
Figure 3-23: RJ-45 RS-232 Serial Device Connection
Step 3:
Insert the serial connector
. Insert the DB-9 connector of a serial device into
the DB-9 connector on the RJ-45 to DB-9 COM port cable.
Step 4:
Secure the connector
. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.