IEI Integration IOPS-Q67_H61 - Manual (Page 30)

IOPS-Q67/H61 Pluggable Module PC
Page 20
Figure 3-6: RJ-45 Serial Port Connection
Step 4: Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
3.4.6 USB 2.0 Connectors
CN Label: USB
CN Type:
USB 2.0 port
CN Pinouts: See Table 3-5
The USB ports are for connecting USB peripheral devices to the system.
Pin Description Pin Description
1 VCC 5 VCC
2 DATA- 6 DATA-
3 DATA+ 7 DATA+
4 GROUND 8 GROUND
Table 3-5: USB Port Pinouts