IEI Integration IOPS-Q67_H61 - Manual (Page 53)

IOPS-Q67/H61 Pluggable Module PC
Page 43
Step 3: Remove the SO-DIMM by releasing the arms on the SO-DIMM socket. (
82
Figure
5-5 ).
Figure 5-5: SO-DIMM Removal
Step 4: Align the new SO-DIMM with the socket . The SO-DIMM must be oriented in
such a way that the notch in the middle of the SO-DIMM must be aligned with
the plastic bridge in the socket (
82
Figure 5-6 ).
Step 5: Insert the SO-DIMM . Push the SO-DIMM chip into the socket at an angle
(
82
Figure 5-6 ).
Figure 5-6: SO-DIMM Installation
Step 6: Secure the SO-DIMM . Press the SO-DIMM down until the arms of the
SO-DIMM socket clip into place and secure the SO-DIMM in the socket. Step 0: