IEI Integration ECN-360A-HM65 - Manual (Page 29)

ECN-360A-HM65 Em b e d d e d S ys te m
P a g e 16
Figure 3-4: Wi-Fi Antenna Installation
3.5 Mo u n tin g Bra c ke t In s ta lla tio n
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
S te p 1: Turn the embedded system over.
S te p 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the sides of the bottom surface.
S te p 3: Secure the brackets to the system by inserting two retention screws into each
bracket as illustrated in Figure 3-5.
Figure 3-5: Mounting Bracket Retention Screws
S te p 4: Drill holes in the intended installation surface.