IEI Integration ECN-360A-HM65 - Manual (Page 32)

ECN-360A-HM65 Em b e d d e d S ys te m
P a g e 19
Figure 3-7: HDMI Connection
S te p 3: Insert the HDMI connector. Gently insert the HDMI connector. The connector
should engage with a gentle push. If the connector does not insert easily, check
again that the connector is aligned correctly, and that the connector is being
inserted with the right way up.
3.6.3 LAN Co n n e c tio n
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
S te p 1: Locate the RJ-45 connectors. The location of the LAN connector is shown in
Chapter 1.
S te p 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the ECN-360A-HM65. See Figure 3-8.