IEI Integration UPC-12AH_GM45 v2.00 - Manual (Page 50)

UPC-12A/GM45 Panel PC
Page 38
Figure 4-7: Battery Installation
Step 4: Replace the HDD/battery access panel. Step 0:
4.8 PCI Expansion Card Installation
The UPC-12A/GM45 has one slot on the bottom panel for PCI card expansion. To install
the PCI card, follow the instructions below.
Step 1: Remove the rear cover. Refer to Section
542H542H542H542H542H542H
5.4.3 Step 1~2 .
Step 2: Remove the PCI slot cover by removing the PCI slot cover retention screw.
Figure 4-8: PCI Card Slot Cover Retention Screws