IEI Integration UPC-12AH_GM45 v2.00 - Manual (Page 60)

UPC-12A/GM45 Panel PC
Page 48
Figure 4-16: Secure the Chassis
4.10.2 Panel Mounting
To mount the UPC-12A/GM45 flat panel PC into a panel, please follow the steps below.
Step 1: Select the position in the panel to mount the panel PC.
Step 2: Cut out a section from the panel that corresponds to the dimensions of the flat
panel PC chassis. The panel section that is cut out must be smaller than the size
of the aluminum frame that surrounds the TFT LCD panel but just large enough
for the chassis to fit through. Refer to
565H565H565H565H565H565H
Figure 4-17 for the suggested cut out size.