IEI Integration AFL-W15A_17D-GM45 v3.00 - Manual (Page 23)

AFL-W15A/17D-GM45 Panel PC
Page 12
Quantity Item Image
1 Utility CD
Table 2-1: Packing List
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
2.3 Hard Drive Installation
This section outlines the installation of the hard drive in the AFL-W15A/17D-GM45. To
install the hard drive, please follow the steps below:
Step 1: Remove the plastic back cover.
Step 2: Unfasten the four silver retention screws. The screws will not separate from the
cover, just loosen as much as possible (
5
Figure 2-1).
Figure 2-1: Aluminum Back Cover Retention Screws
Step 3: Slide the cover down, then lift to remove.