IEI Integration AFL-W15A_17D-GM45 v3.00 User Manual
Page 46
AFL-W15A/17D-GM45 Panel PC
Page 35
Î
DMA Mode [Auto]
Use the DMA Mode BIOS selection to adjust the DMA mode options.
Î
Auto D
EFAULT
BIOS auto detects the DMA mode. Use this value if the IDE
disk drive support cannot be determined.
Î
SWDMA0
Single Word DMA mode 0 selected with a maximum data
transfer rate of 2.1 MB/s
Î
SWDMA1
Single Word DMA mode 1 selected with a maximum data
transfer rate of 4.2 MB/s
Î
SWDMA2
Single Word DMA mode 2 selected with a maximum data
transfer rate of 8.3 MB/s
Î
MWDMA0
Multi Word DMA mode 0 selected with a maximum data
transfer rate of 4.2 MB/s
Î
MWDMA1
Multi Word DMA mode 1 selected with a maximum data
transfer rate of 13.3 MB/s
Î
MWDMA2
Multi Word DMA mode 2 selected with a maximum data
transfer rate of 16.6 MB/s
Î
UDMA0
Ultra DMA mode 0 selected with a maximum data transfer
rate of 16.6 MB/s
Î
UDMA1
Ultra DMA mode 1 selected with a maximum data transfer
rate of 25 MB/s
Î
UDMA2
Ultra DMA mode 2 selected with a maximum data transfer
rate of 33.3 MB/s
Î
UDMA3
Ultra DMA mode 3 selected with a maximum data transfer
rate of 44 MB/s (To use this mode, it is required that an
80-conductor ATA cable is used.)
Î
UDMA4
Ultra DMA mode 4 selected with a maximum data transfer
rate of 66.6 MB/s (To use this mode, it is required that an
80-conductor ATA cable is used.)