IEI Integration AFL-15A-N270 v2.10 - Manual (Page 41)

AFOLUX AFL-15A-N270 Panel PC
Page 41
Figure 4-3: HDD Bracket Retention Screws
Step 4: Attach the HDD brackets to the HDD. To do this, align the four retention screw
holes in the base of the HDD bracket with the retention screw holes on the
bottom of the HDD. Insert four retention screws into the HDD bracket
(Figure 4-4).
Figure 4-4: AFL-15A-N270 HDD Retention Screws
Step 5: Insert the rear of HDD into the SATA connector on the motherboard.
Step 6: Secure the HDD to the AFL-15A-N270 by aligning the retention screw holes in
the HDD brackets with the retention screw holes on the chassis. Insert the four
retention screws.