IEI Integration AFL-15A-N270 v2.10 - Manual (Page 57)

AFOLUX AFL-15A-N270 Panel PC
Page 57
Figure 4-16: Panel Mounting
4.10.3 Arm Mounting
The AFL-15A-N270 series is VESA (Video Electronics Standards Association) compliant
and can be mounted on an arm with a 75mm or 100mm interface pad. To mount the
AFL-15A-N270 series on an arm, please follow the steps below.
Step 1: The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
NOTE:
When purchasing the arm please ensure that it is VESA compliant and that
the arm has a 100 mm interface pad. If the mounting arm is not VESA
compliant it cannot be used to support the AFL-15A-N270 series flat panel
PC.