IEI Integration AFL-15A-N270 v2.10 - Manual (Page 44)

AFOLUX AFL-15A-N270 Panel PC
Page 44
COM3 TX RS-422/485 select JP11 6-pin header
COM3 RS-232/422/485 select JP10 12-pin header
Table 4-1: Jumpers
4.9.1 Access the Jumpers
To access the jumpers, please remove the back panel and the internal aluminum chassis
(see Section 5.4).
4.9.2 Preconfigured Jumpers
WARNING:
Do not change the settings on the jumpers in described here. Doing so
may disable or damage the system.
The following jumpers are preconfigured for the AFL-15A-N270. Users should no change
these jumpers (Table 4-2).
Jumper Name Label Type
LVDS voltage selection J_VLVDS1 4-pin header
Touch Screen Select J1 4-pin header
Panel Type and Resolution J_LCD_TYPE1 8-pin header
Table 4-2: Preconfigured Jumpers