Figure 4-17: afl-10a-n270 panel opening, Figure 4-18: afl-12a-n270 panel opening, Figure 4-17 and figure 4-18 – IEI Integration AFL-xxA-N270-Series v2.00 User Manual
Page 64
Advertising
AFL-xxA-N270 Series Panel PC
Page 49
Figure 4-17: AFL-10A-N270 Panel Opening
Figure 4-18: AFL-12A-N270 Panel Opening
Step 12:
Slide the flat panel PC through the hole until the frame is flush against the panel.
Step 13:
Insert the panel mounting clamps into the pre-formed holes along the edges of
the chassis, behind the frame.
Step 14:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (Figure 4-19).
Step 14:
Advertising