3 i/o interface panel – IEI Integration AFL-W10A-N270 v3.20 User Manual
Page 19
Advertising
AFL-W10A-N270 User Manual
Page 5
Figure 1-3: AFL-W10A-N270 Rear View
1.2.3 I/O Interface Panel
The I/O interface panel located on the bottom of the AFL-W10A-N270 has the following
I/O interface connectors:
1 x 12 V DC-IN connector
1 x Audio line-out jack
1 x External SATA port
1 x Mic-in jack
1 x Power switch
1 x Reset button
2 x RJ-45 LAN connectors
1 x RS-232 serial port
1 x RS-232/422/485 serial port
2 x USB 2.0 connectors
The external I/O interface connector panel is shown in the following figure.
Advertising