5 replacing components, 1 memory module replacement, Eplacing – IEI Integration AFL2-W19A-H61 v1.11 User Manual
Page 138: Omponents, Figure 7-3: internal components
AFL2-W19A/AB-H61
P a g e 119
S te p 2:
Lift the aluminum cover off the AFL2-W19A/AB-H61.
S te p 3:
The internal parts will all be viewable.
Figure 7-3: Internal Components
7.5 Re p la c in g Co m p o n e n ts
7.5.1 Me m o ry Mo d u le Re p la c e m e n t
The flat bezel panel PC is preinstalled with two 2.0 GB DDR3 memory module. If the
memory module fails, follow the instructions below to replace the memory module.
S te p 1:
Follow all anti-static procedures. See Section 7.2.
S te p 2:
Turn off the power. See Section 7.3.
S te p 3:
Remove the back cover. See Section 7.4.1 above.
S te p 4:
Remove the internal aluminum back cover. See Section 7.4.2 above.
S te p 5:
Locate the DDR3 SO-DIMM on the motherboard.
S te p 6:
Remove the DDR3 memory module by pulling both the spring retainer clips
outward from the socket.
S te p 7:
Grasp the DDR3 memory module by the edges and carefully pull it out of the
socket.