Figure 7-7: removing the wlan card, Figure 7-8: attaching the antennas – IEI Integration AFL2-W19A-H61 v1.11 User Manual
Page 141
Advertising
AFL2-W19A/AB-H61
P a g e 122
Figure 7-7: Removing the WLAN card
S te p 9:
Install a new WLAN card by inserting the card into the slot at an angle
S te p 10:
Push the WLAN card down until the spring retainer clips lock into place.
S te p 11:
Connect the main (1) and auxiliary (2) antennas. The main antenna is indicated
with a strip of black electrical tape. See Figure 7-8.
NOTE:
To ensure the WLAN module functions correctly, please make sure the
WLAN antennas are attached in the proper configuration.
Figure 7-8: Attaching the Antennas
Advertising