Figure 5-7: connect the rfid usb cable, Figure 5-8: install the rfid module – IEI Integration AFL2-W19A-H61 v1.11 User Manual
Page 75
Advertising
AFL2-W19A/AB-H61
P a g e 56
Figure 5-7: Connect the RFID USB cable
S te p 4:
Connect the RFID connector of the RFID USB cable to the RFID connector on
the motherboard (RFID_USB1).
S te p 5:
Attach the sticker of the RFID module to the bottom of the panel.
Figure 5-8: Install the RFID module
S te p 6:
Secure the RFID module to the motherboard using two retention screws on
either side.
Advertising