IEI Integration AFL2-W15A-N270 v2.00 - Manual (Page 29)

AFL2-W15A-N270 Panel PC
Page 17
2.5 USB Dongle Installation
The installation for an USB dongle is described in this section.
Step 1: Remove the access panel and brackets as described in the HDD installation
instructions.
Step 2: Locate the USB dongle connector and install the USB dongle as shown below.
Figure 2-7: USB Dongle Installation
Step 3: Replace the bracket, access panel and screws.
2.6 Cover Removal
WARNING!
Turn off the power before removing the back cover . Risk of
electrocution. Severe damage to the product and injury to the body
may occur if internal parts are touched while the power is still on.