4 vga monitor connection, Figure 2-30: vga connector – IEI Integration AFL2-W15A-N270 v2.00 User Manual
Page 51
AFL2-W15A-N270 Panel PC
Page 39
Step 3:
Insert the device connector.
Once aligned, gently insert the USB device
connector into the onboard connector.
Step 0:
2.9.4 VGA Monitor Connection
The VGA output can be connected to an external VGA monitor. To connect the VGA
monitor to the AFL2-W15A-N270, please follow the instructions below.
Step 1:
Locate the female DB-15 connector
. The location of the female DB-15
connector is shown in Figure 2-26.
Step 2:
Align the VGA connector
. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3:
Insert the VGA connector
.
Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
AFL2-W15A-N270. See Figure 2-30.
Figure 2-30: VGA Connector
Step 4:
Secure the connector
. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
Step 0: