IEI Integration POC-17i_19i-Series_IEI - Manual (Page 44)

POC-17i/19i Series
Page 32
Figure 3-12: SPI Jumper Location
3.7 Mounting the System
WARNING!
When mounting the flat panel PC onto an arm, onto the wall or onto a
panel, it is better to have more than one person to help with the installation
to make sure the panel PC does not fall down and get damaged.
The methods of mounting the POC-17i/19i Series are listed below.
ƒ Wall mounting
ƒ Arm mounting
The mounting methods are described below.
3.7.1 Wall Mounting
To mount the flat panel PC onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.