Hdc-3x series sdk (linux) page 12 – IEI Integration HDC-3x-Series_SDK_Linux User Manual
Page 12
HDC-3x Series SDK (Linux)
Page 12
fmb-0?>
Step 4:
Select a port to configure by entering the port number. For example, type 1 to
select the first port.
fmb-0?>1
Step 5:
The following message shows.
< Encode settings - Sub menu >
‘Z’<-~~~~~~~~
Select following number. (Current settings)
1 Output port setting
(File ./stream-0.mpg)
2 Video resolution setting
(1920x1080_59.94p)
3 Video bitrate setting
(CBR, 6000kbps)
4 Audio format
(MPEG1L2, 256kbps)
5 Video scale (Not Use)
fmb-0?>
NOTE:
The user can enter Z at anytime to go back to the previous page.
Step 6:
Configure the file name of the encoded file. To configure the file name, type 1
to select the “Output port setting”.
fmb-0?>1
Step 7:
The following message shows.
[[[ Encode settings - Sub menu -> Output port ]]]
‘Z’<-~~~~~~~~~~~->Enter
Select following number. (* is current setting)
1 * File
fmb-0?>
Step 8:
Type 1 to select “File”.