IEI Integration HDC-3x-Series_SDK_Linux - Manual (Page 13)

HDC-3x Series SDK (Linux)
Page 13
fmb-0?>1
Step 9: The following message shows the current file name is “stream-0.mpg”.
[[[ Encode settings - Sub menu -> Output port -> File ]]]
~~~~->Enter
Input filepath of stream.
Current filepath is ./stream-0.mpg.
fmb-0?>
Step 10: Type the new file name. Take “video1.mpg” as an example.
fmb-0?>video1.mpg
Step 11: The encoding setting sub menu appears. The file name has been changed to
“video1.mpg”.
< Encode settings - Sub menu >
‘Z’<-~~~~~~~~
Select following number. (Current settings)
1 Output port setting (File video1.mpg)
2 Video resolution setting (1920x1080_59.94p)
3 Video bitrate setting (CBR, 6000kbps)
4 Audio format (MPEG1L2, 256kbps)
5 Video scale (Not Use)
fmb-0?>
Step 12: Video resolution settings. The encoding video resolution is automatically
detected by the hardware and can not be changed from the HDCapture SDK. If
the video resolution is changed and does not match the current settings list in
the SDK sub-menu, please type 2 to select “Video resolution setting”.
fmb-0?>2
Step 13: When the following message shows, press Enter to reload the current setting.
[[[ Encode settings - Sub menu -> Video resolution ]]]
‘Z’<-~~~~~~~~~~~~~~~->Enter