IEI Integration HDC-3x-Series_SDK_Linux - Manual (Page 28)

HDC-3x Series SDK (Linux)
Page 28
fmb-0?>2
Step 2: The following message shows.
< Device list >
Select following number.
1 /dev/h55fmb0
2 /dev/h55fmb1
3 /dev/h55fmb2
4 /dev/h55fmb3
fmb-0?>
Step 3: Select a port by entering the port number. The selected port must be same with
the port selected in the decoding setting. The first port is selected in the
encoding setting (Section 1.6.1 Step 4 ), so type 1 to select the first port.
fmb-0?>1
Step 4: The current settings of the selected port shows as following.
[[[ Decoding - confirm -> Decoding ]]]
‘Z’<-~~~~~~~->Enter
Current settings
Stream input File ./video1.mpg
Start file position 0 / 18474912 byte
Video format 1920x1080
Video framerate 59.94i
Audio format MPEG1L2
Press <Enter> key to start decoding.
fmb-0?>
Step 5: Press Enter. The system shows the following message and starts decoding
video.
[[[ Decoding ]]]
Select following character.