Hdc-3x series sdk (linux) page 17 – IEI Integration HDC-3x-Series_SDK_Linux User Manual
Page 17
HDC-3x Series SDK (Linux)
Page 17
Step 18:
Configure the video bitrate. To configure the video bitrate, type 3 to select the
“Video bitrate setting”.
fmb-0?>3
Step 19:
The following message shows.
[[[ Encode settings - Sub menu -> Video ratecontrol -> Video bitrate ]]]
‘Z’<-~~~~~~~~~~~~~~~~~->Enter
Select following number. (* is current setting)
1 * CBR
2 VBR
fmb-0?>
Step 20:
To configure the video bitrate as CBR, type 1 to select “CBR”. To configure the
video bitrate as VBR, type 2 to select “VBR”. Now we take CBR as an example.
fmb-0?>1
Step 21:
The following message shows the current CBR value.
[[[ Encode settings - Sub menu -> Video rate control -> Video bitrate ]]]
‘Z’<-~~~~~~~~~~~~~->Enter
Input bitrate in kbps. (6000kbps -- 24000kbps(I) or 30000kbps(P))
Current value is 6000kbps.
fmb-0?>
Step 22:
To change the value, enter a bitrate.
Step 0:
fmb-0?>24000
< Encode settings - Sub menu >
‘Z’<-~~~~~~~~
Select following number. (Current settings)
1 Output port setting
(File video1.mpg)
2 Video resolution setting
(1920x1080_59.94p)
3 Video bitrate setting
(CBR, 24000kbps)
4 Audio format
(MPEG1L2, 256kbps)