5 using barcode scanner, Sing, Arcode – IEI Integration ICECEARE-10W User Manual
Page 32: Canner, Figure 3-9: nxp pcsc tool – read rfid card, Figure 3-10: rfid reader location
ICECARE-10W Mobile Sales Assistant
Page 20
Step 8:
Click the Arrow button shown in Figure 3-9 to read RFID card.
Figure 3-9: NXP PCSC Tool – Read RFID Card
Step 9:
Use the RFID reader to read a RFID card. The RFID reader is located on the
rear panel as shown in Figure 3-10. The card information will be shown in the
Scenario and Logs columns of the PCSC Tool.
Figure 3-10: RFID Reader Location
3.5 Using Barcode Scanner
Some models of the ICECARE-10W Series have a barcode scanner on the rear panel. To
use the barcode scanner, follow the steps below.
Step 1:
Check the barcode status indicator on the front panel to make sure the barcode
function is enabled (see Section 1.4.1). The barcode function is enabled by
default in the BIOS menu. If the barcode scanner is disabled, please go to