IEI Integration ICECEARE-10W - Manual (Page 73)

ICECARE-10W Mobile Sales Assistant
Page 61
5.3.8.1 Serial Port 1 Configuration
Use the Serial Port n Configuration menu (
4
BIOS Menu 11 ) to configure the serial port 1
on the docking station.
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings
[Auto]
Enable or Disable Serial
Port (COM)
---------------------
ÆÅ: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1229. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 11: Serial Port 1 Configuration Menu
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled Disable the serial port
Î
Enabled D EFAULT
Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT
The serial port IO port address and interrupt address
are automatically detected.
Î
IO=3F8h;
IRQ=4
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ4