AT&T 900 MHz - Manual (Page 36)

Remote Access Commands
Function: Command:
Play all messages in Press 1, then mailbox number (1 or 2).
a mailbox
Play new messages in Press 2, then mailbox number (1 or 2).
a mailbox
Repeat a message Press 4 while message is playing; each
press backs up another message.
Skip a message Press 6 while message is playing; each
press advances another message.
Stop Press 5.
Save messages Hang up.
Play messages in After “End of messages” and two beeps,
another mailbox press 1 (all) or 2 (new), then mailbox
number ( 1 or 2).
Delete selected message Press 3 while message is playing.
Delete all messages After “End of messages,” press 3, then
mailbox number ( 1 or 2).
Review announcement Press 7; system beeps twice, is ready
to accept a command.
Record announcement Press * 7; after beep, record
announcement, press 5 to stop. System
beeps twice, is ready to accept command.
Record memo Press #, then mailbox number where
you want memo recorded; speak after
beep; press
5 to exit.
Review settings Press 9; system announces current settings.
Change settings Press * 9.
ANSWERING SYSTEM OPERATION
AT CORDLESS HANDSET OR TOUCH TONE PHONE
35