Power wave i400 synchronized tandem, Warning, Installation – Lincoln Electric IM10125 AutoDrive 19 TANDEM User Manual
Page 11: Installation instructions
A-4
INSTALLATION
AutoDrive
®
19 Tandem
A-4
INSTALLATION INSTRUCTIONS:
WARNING
CAN KILL
ELECTRIC SHOCK
Disconnect input power before servicing.
Do not operate with covers removed.
Do not touch electrically live parts.
Only qualified persons should install, use
or service this equipment.
POWER WAVE i400 SYNCHRONIZED TANDEM
Parts Lists :
OVERVIEW:
The following hardware must be installed to convert two Power Wave i400 power sources into
a Synchronized Tandem welding system.
NOTE: The Synchronized Tandem and DeviceNet receptacles utilize the same control panel
mounting hole. Therefore, if the Power Wave i400 is equipped with a DeviceNet receptacle it
must be removed prior to the installation of this kit.
Item Part Number
Description
Qty.
1
M21927
Plug and Lead Assembly
1
3
T13770-2
Cable Tie (Black)
1
2
M20979-1
1
Interconnect Cable Assembly
®
®
®