Lincoln Electric IM10080 RED-D-ARC LN-25 PRO EXTREME DUAL POWER - Manual (Page 20)

A-11 INSTALLATION
RED-D-ARC LN25™ PRO EXTREME DUAL POWER
A-11
CV Power Source with Twist-Mate Connectors and
no Remote/Local Switch. (See Figure A.9)
Place CV/CC switch in the feeder in the "CV" position.
CV-250
CV-300
Work
Electrode
Jump er
W or k clip
RED-D-ARC LN25™
PRO EXTREME
DUAL POWER
FIGURE A.9
K#
K2614-7
KP1695-XX
KP1696-XX
KP1697-XX
See Magnum Pro Literature
K1841-XX
K852-95
K484
Description
RED-D-ARC LN25™ PRO
EXTREME DUAL POWER
Drive Roll Kit
Welding Gun
CV power Source
Welding Cables
Twist-Mate Cable Plug
Jumper Plug kit
CONTROL CABLE SET-UPS
CV Power Source with 24-42 VAC
(See Figure A.10)
If present, place the power source
Remote/Local Switch in the Remote
position.
Place CV/CC switch in the feeder in
the "CV" position.
CV Power Source
CV-305
CV-400
CV-655
DC-400
DC-655
V-350
V-450
Work
Electrode
Control Cable
VANTAGE 300, 400, 500
RANGER 250, 305
ENGINE DRIVE WITH
WIRE FEED MODULE
SAE’s WITH K385-2
RED-D-ARC LN25™
PRO EXTREME
DUAL POWER
K#
K2614-7
KP1695-XX
KP1696-XX
KP1697-XX
K1797-xx
K2335-1
See Magnum Pro Literature
KP1803-XX
K852-95
Description
RED-D-ARC LN25™ PRO
EXTREME DUAL POWER,
Drive Roll Kit
Control Cable
Adapter for Competitive Power Sources
Welding Gun
CV power source
Welding Cables
Twist-Mate Cable Plug
FIGURE A.10
ELECTRIC SHOCK CAN KILL.
• When the wire feeder is connected to the power source with the control cable, the
contactor in the wire feeder is always closed and the wire drive and the gun may be at
welding potential.
WARNING