Installation, Interfacing to the maxsa™ 19 con- troller – Lincoln Electric IM10021 MAXsa 19 CONTROLLER User Manual
Page 10
A-3
INSTALLATION
MAXsa™ 19 CONTROLLER
A-3
FIGURE A.1 - CONNECTION DIAGRAM
K2683-XX
Arclink Cable
67 Lead
K1785-XX
14-Pin Cable
Work
K231-XX
Contact Nozzle
K2803-1
Power Wave
®
AC/DC 1000 SD
K2312-2
(For Codes 11778 and above)
MAXsa
™
29
K1811-XX
Sense Lead
Electrode
Weld Cable
Work
Weld Cable
Connection Diagrams for Additional
Configurations (Multi-Arc and Parellel Power Sources)
are in the Power Wave
®
AC/DC 1000 SD Operators Manual
K2626-2
MAXsa
™
19
K1543-XX or
INTERFACING TO THE MAXsa™ 19 CON-
TROLLER
The MAXsa™ 19 is a versatile controller designed to
operate in a Power Wave
®
AC/DC 1000 SD system
and is responsible for relaying wire feed commands to
a MAXsa™ 29 Wire Drive. It is connected to the Power
Wave
®
AC/DC 1000 SD by a K2683-xx ArcLink Cable
and to the Wire Drive by a K1785-xx 14 Pin Control
Cable.
The MAXsa™ 19 is required whenever a customer
supplied user interface is used in place of a MAXsa™
10 Controller.